Learn how to assemble a cone-shaped cannabis joint with these simple steps.

Learn how to assemble a cone-shaped cannabis joint with these simple steps.

Putting together a cone-shaped marijuana joint may seem difficult, but with a little practice anyone can do it.

This type of joint is popular because it offers a different smoking experience than traditional joints. In this article, we’ll take a step-by-step look at how to put together a cone-shaped marijuana joint so you can enjoy a unique and spectacular smoking experience.

What materials are needed to make a cone-shaped joint?

Before you start, you will need to make sure you have each of the necessary materials:

  • Your favorite strain of cannabis.
  • Smoking paper.
  • Cardboard filter.
  • Pen or toothpick (will be used to push the cannabis through).

Step 1 – Assemble the cardboard filter.

Roll a filter at least 0.6 cm in diameter out of lightweight cardboard. Hold it over the fold or crease of the cardboard, with the glue on top.

Don’t forget to place it on the inner side.

Step 2 – Fill the paper

Sprinkle the desired amount of finely ground flower along the center fold. This can be anywhere from half a gram to 3 grams, as long as you plan to make a huge cone.

Step 3 – Shape the cone

Fold the excess paper over the filter and flower with your thumbs and gentle pressure. Using a motion similar to snapping your fingers in slow motion, tuck the paper into the flower as a joint begins to form.

Step 4 – Roll your joint

As you get closer to the top of the paper, moisten the rubber band a bit. Quickly finish the roll up and carefully push the weed in with a toothpick, pen or other fine instrument. Finally, tuck or twist the remaining tip.

Step 5 – Crimp it

Do it evenly and carefully, this way you will avoid “canoeing”, that is, you will avoid getting a hole on one side because you have let the joint burn too much on one side.

Do this correctly and you will not lose cannabis because of this common problem.

Tips for building a cone-shaped joint

If you are new to rolling joints, it is important to practice before attempting to roll a cone. Once you feel comfortable rolling joints, you can start experimenting with different shapes and sizes.

Here are some tips on how to roll a cone-shaped cannabis joint:

– Use thin rolling papers to prevent the joint from burning too quickly.

– Make sure the cannabis is well ground so that it burns evenly.

– Don’t overfill the joint, as this can cause it to burn poorly.

– If you want your cone to be bigger, add more cannabis in layers as you roll it.

– Use a cardboard filter to avoid burning your mouth when smoking.

How can I make a perfect cone joint?

Putting together a perfect cone-shaped cannabis joint takes practice and patience.

We’ve found several pro tips to help you put together the perfect joint more easily:

  1. Use an even amount of cannabis so that the cone is symmetrical.
  2. Roll the rolling paper with even tension to prevent the cone from unraveling.
  3. Make sure the filter is tight to prevent the cannabis from coming out.
  4. Lightly dampen the rubber strip to seal the cone tightly.
  5. Use a pen or other fine instrument to push the cannabis in and make sure the cone is well filled.


Putting together a cone-shaped cannabis joint is a tricky one at first, but with a little practice, even the least skilled will be able to do it.

Make sure you have all the materials you need before you start and carefully follow the steps outlined in this article to get the perfect cone. With these tips and tricks, you will be able to enjoy a unique, creative and completely satisfying smoking experience.